Made using a "shelf" pattern trigger housing as the base, with full markings on the housing and the serial number repeated on the sear. The internals are configured for an ambidextrous selector, in "full auto/two-round burst/semi/safe" configuration.
Very fine, with mild handling marks. Mechanically in fine order. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479.
Manufactured in 1986 in Germany and imported through HK Inc of Chantilly, Virginia, this item has been modified into a "MP5SD" pattern host gun for the trigger pack in Item A. One of the most famous variants of the MP5, the integrally silenced MP5SD was one of the best combinations of firepower and signature reduction during it's period of use, and has a strong association with top tier special operations outfits like the Navy SEALs and British SAS. This example uses a threaded mounting collar at the base of the barrel for a detachable silencer instead of an integral can, but retains the barrel porting designed to start venting gas into the silencer before the bullet clears the muzzle. Hooded post front and four-position drum rear sights, model and caliber markings on top, and the Fleming address on the left side under the trigger housing. The receiver is the "shelf" pattern, with a functional paddle release, signature ribbed forearm/heat shield, plastic trigger housing with pictographic markings that match the trigger pack, and a two-position telescoping buttstock. The bolt carrier has been professionally altered to engage the sear.
Excellent as reconfigured, with 95% factory quality matte black finish, showing mild handling marks overall. Furniture is in equal condition. Mechanically excellent.
Steel and alloy construction, 12 inches in overall length, with an expansion chamber in the rear to accept the gases vented by the barrel porting and a baffle stack in the front half.
Very fine, with light wear and handling marks. NOTE: This Silencer is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479, National Firearms Act.
There are currently no customer product questions on this lot